Assessment of External Alarm System Performance and Quality Using ISO/IEC 25010 Framework
DOI:
https://doi.org/10.70356/jafotik.v4i1.100Keywords:
ISO/IEC 25010, External Alarm System, PLS-SEMAbstract
This study assesses the performance and quality of an external alarm system using the ISO/IEC 25010 framework. The evaluation covers eight quality characteristics: functional suitability, performance efficiency, compatibility, usability, reliability, security, maintainability, and portability. Data were collected through structured questionnaires and analyzed using Partial Least Squares–Structural Equation Modeling (PLS-SEM). The measurement model results indicate that all constructs meet the required validity and reliability criteria. Outer loadings range from 0.730 to 0.956, exceeding the recommended threshold of 0.70. The Average Variance Extracted (AVE) values are above 0.50, confirming convergent validity. Furthermore, Cronbach’s Alpha and Composite Reliability values exceed 0.70 for all constructs, demonstrating strong internal consistency. These findings confirm that the external alarm system meets established software quality standards and performs reliably across multiple dimensions. The validated model provides a robust foundation for further structural analysis and quality improvement strategies.
Downloads
References
S. Yakubu, M. Shafie-khah, and M. Elmusrati, “Cyber-physical attack and the future energy systems : A review,” Energy Reports, vol. 12, no. July, pp. 2914–2932, 2024. doi: https://doi.org/10.1016/j.egyr.2024.08.060.
A. Haleem, M. Javaid, and R. Pratap, “Green Technologies and Sustainability Encouraging Safety 4 . 0 to enhance industrial culture : An extensive study of its technologies , roles , and challenges,” Green Technol. Sustain., vol. 3, no. 3, p. 100158, 2025, doi: https://doi.org/10.1016/j.grets.2024.100158.
B. Kidmose, “A review of smart vehicles in smart cities : Dangers , impacts , and the threat landscape,” Veh. Commun., vol. 51, no. July 2024, p. 100871, 2025, doi: https://doi.org/10.1016/j.vehcom.2024.100871.
E. Wolf, “Quality assessment of software requirements using artificial intelligence methods : A systematic literature review,” Inf. Softw. Technol., vol. 191, no. November 2025, p. 107979, 2026, doi: https://doi.org/10.1016/j.infsof.2025.107979.
S. Alam, K. Aminul, R. Miah, and S. Afrin, “Heliyon Key success factors of knowledge management systems for optimizing organizational performance : A PRISMA-based systematic literature review,” Heliyon, vol. 11, no. 16, p. e44097, 2025, doi: https://doi.org/10.1016/j.heliyon.2025.e44097.
L. Sofia, M. Estrada, M. Haase, M. Baumann, and M. Cinelli, “Decision support for energy system transformation – A systematic analysis of MADM software for sustainability assessment,” Energy Strateg. Rev., vol. 63, no. May 2025, p. 102016, 2026, doi: https://doi.org/10.1016/j.esr.2025.102016.
A. Trendowicz et al., “User experience key performance indicators for industrial IoT systems : A multivocal literature review,” Digit. Bus., vol. 3, no. 1, p. 100057, 2023, doi: https://doi.org/10.1016/j.digbus.2023.100057.
S. Bernardo et al., “Software Quality Assurance as a Service : Encompassing the quality assessment of software and services,” Futur. Gener. Comput. Syst., vol. 156, no. February, pp. 254–268, 2024, doi: https://doi.org/10.1016/j.future.2024.03.024.
M. A. Saidah, H. A. Saputri, and Z. Zulfachmi, “Analisis kualitas aplikasi Aku Pintar dengan menggunakan framework ISO/IEC 25010,” Jurnal Bangkit Indonesia, vol. 12, no. 1, pp. 49–55, 2023, doi: https://doi.org/10.52771/bangkitindonesia.v12i1.229.
A. Haleem, M. Javaid, and R. Pratap, “Green Technologies and Sustainability Encouraging Safety 4 . 0 to enhance industrial culture : An extensive study of its technologies , roles , and challenges,” Green Technol. Sustain., vol. 3, no. 3, p. 100158, 2025, doi: https://doi.org/10.1016/j.grets.2024.100158.
P. Kwan, C. Wong, W. Kit, H. Hung, J. Huang, and M. Pecht, “Results in Engineering Reliability and safety of elevators and escalators / travelators : Past , present and future,” Results Eng., vol. 25, no. January, p. 104194, 2025, doi: https://doi.org/10.1016/j.rineng.2025.104194.
N. Alsadi, W. Hilal, A. Mccafferty-leroux, S. A. Gadsden, and J. Yawney, “Internet of Things Smart systems : A review of theory , applications , and recent advances,” Internet of Things, vol. 33, p. 101667, 2025, doi: https://doi.org/10.1016/j.iot.2025.101667.
X. Weng, Z. Nie, X. Xu, L. Chang, and Z. Zhou, “Hierarchical correlation modeling and evidence fusion for multivariate alarm systems in high-dimensional processes,” Process Saf. Environ. Prot., vol. 203, no. PA, p. 107882, 2025, doi: https://doi.org/10.1016/j.psep.2025.107882.
Y. Cao, W. Lian, J. Yang, C. Zhang, and X. Chang, “Measurement : Sensors Design of high-precision displacement safety monitoring and three-dimensional spatial alarm system for Beidou based on intelligent algorithms,” Meas. Sensors, vol. 33, no. February, p. 101099, 2024, doi: https://doi.org/10.1016/j.measen.2024.101099.
M. Zeng and Y. Lian, “Original article A power network anomaly alarm denoising method based on a hybrid LSTM-attention model,” vol. 137, no. August 2025, pp. 76–88, 2026.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 M Aidil Irawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
