Performance and Quality Evaluation of the External Alarm System Based on ISO/IEC 25010 Standards
DOI:
https://doi.org/10.70356/josapen.v4i1.88Keywords:
ISO/IEC 25010, Software Quality Evaluation, Performance Analysis, External Alarm SystemAbstract
This study evaluates the performance and quality of an external alarm system using the ISO/IEC 25010 software product quality model. The evaluation focuses on eight quality characteristics, namely functional suitability, performance efficiency, compatibility, usability, reliability, security, maintainability, and portability, to provide a comprehensive assessment of the system. A quantitative approach was employed, and data were analyzed using a measurement model to test construct validity and reliability. The results of the validation test show that all indicators have outer loading values above 0.70 and Average Variance Extracted (AVE) values exceeding 0.50, confirming satisfactory convergent validity. Reliability testing also indicates strong internal consistency, with Cronbach’s Alpha and Composite Reliability values for all constructs exceeding the recommended threshold of 0.70. These findings demonstrate that the proposed measurement model is valid and reliable for evaluating external alarm systems. Overall, the study confirms that ISO/IEC 25010 provides a robust and effective framework for assessing software quality and performance in safety-critical alarm systems.
Downloads
References
S. Yakubu, M. Shafie-khah, and M. Elmusrati, “Cyber-physical attack and the future energy systems : A review,” Energy Reports, vol. 12, no. July, pp. 2914–2932, 2024. doi: https://doi.org/10.1016/j.egyr.2024.08.060.
A. Haleem, M. Javaid, and R. Pratap, “Green Technologies and Sustainability Encouraging Safety 4 . 0 to enhance industrial culture : An extensive study of its technologies , roles , and challenges,” Green Technol. Sustain., vol. 3, no. 3, p. 100158, 2025, doi: https://doi.org/10.1016/j.grets.2024.100158.
B. Kidmose, “A review of smart vehicles in smart cities : Dangers , impacts , and the threat landscape,” Veh. Commun., vol. 51, no. July 2024, p. 100871, 2025, doi: https://doi.org/10.1016/j.vehcom.2024.100871.
E. Wolf, “Quality assessment of software requirements using artificial intelligence methods : A systematic literature review,” Inf. Softw. Technol., vol. 191, no. November 2025, p. 107979, 2026, doi: https://doi.org/10.1016/j.infsof.2025.107979.
S. Alam, K. Aminul, R. Miah, and S. Afrin, “Heliyon Key success factors of knowledge management systems for optimizing organizational performance : A PRISMA-based systematic literature review,” Heliyon, vol. 11, no. 16, p. e44097, 2025, doi: https://doi.org/10.1016/j.heliyon.2025.e44097.
L. Sofia, M. Estrada, M. Haase, M. Baumann, and M. Cinelli, “Decision support for energy system transformation – A systematic analysis of MADM software for sustainability assessment,” Energy Strateg. Rev., vol. 63, no. May 2025, p. 102016, 2026, doi: https://doi.org/10.1016/j.esr.2025.102016.
A. Trendowicz et al., “User experience key performance indicators for industrial IoT systems : A multivocal literature review,” Digit. Bus., vol. 3, no. 1, p. 100057, 2023, doi: https://doi.org/10.1016/j.digbus.2023.100057.
S. Bernardo et al., “Software Quality Assurance as a Service : Encompassing the quality assessment of software and services,” Futur. Gener. Comput. Syst., vol. 156, no. February, pp. 254–268, 2024, doi: https://doi.org/10.1016/j.future.2024.03.024.
M. A. Saidah, H. A. Saputri, and Z. Zulfachmi, “Analisis kualitas aplikasi Aku Pintar dengan menggunakan framework ISO/IEC 25010,” Jurnal Bangkit Indonesia, vol. 12, no. 1, pp. 49–55, 2023, doi: https://doi.org/10.52771/bangkitindonesia.v12i1.229.
A. Haleem, M. Javaid, and R. Pratap, “Green Technologies and Sustainability Encouraging Safety 4 . 0 to enhance industrial culture : An extensive study of its technologies , roles , and challenges,” Green Technol. Sustain., vol. 3, no. 3, p. 100158, 2025, doi: https://doi.org/10.1016/j.grets.2024.100158.
P. Kwan, C. Wong, W. Kit, H. Hung, J. Huang, and M. Pecht, “Results in Engineering Reliability and safety of elevators and escalators / travelators : Past , present and future,” Results Eng., vol. 25, no. January, p. 104194, 2025, doi: https://doi.org/10.1016/j.rineng.2025.104194.
N. Alsadi, W. Hilal, A. Mccafferty-leroux, S. A. Gadsden, and J. Yawney, “Internet of Things Smart systems : A review of theory , applications , and recent advances,” Internet of Things, vol. 33, p. 101667, 2025, doi: https://doi.org/10.1016/j.iot.2025.101667.
X. Weng, Z. Nie, X. Xu, L. Chang, and Z. Zhou, “Hierarchical correlation modeling and evidence fusion for multivariate alarm systems in high-dimensional processes,” Process Saf. Environ. Prot., vol. 203, no. PA, p. 107882, 2025, doi: https://doi.org/10.1016/j.psep.2025.107882.
Y. Cao, W. Lian, J. Yang, C. Zhang, and X. Chang, “Measurement : Sensors Design of high-precision displacement safety monitoring and three-dimensional spatial alarm system for Beidou based on intelligent algorithms,” Meas. Sensors, vol. 33, no. February, p. 101099, 2024, doi: https://doi.org/10.1016/j.measen.2024.101099.
M. Zeng and Y. Lian, “Original article A power network anomaly alarm denoising method based on a hybrid LSTM-attention model,” vol. 137, no. August 2025, pp. 76–88, 2026.
B. Vogel-heuser, A. Fay, I. Schaefer, and M. Tichy, “The Journal of Systems and Software Evolution of software in automated production systems : Challenges and research directions,” J. Syst. Softw., vol. 110, pp. 54–84, 2015, doi: https://doi.org/10.1016/j.jss.2015.08.026.
F. Bellini, P. Pisani, A. Barzegar, and Y. Barzegar, “ScienceDirect Measuring Measuring Software Software Product Product Quality Quality Based Based on on Fuzzy Fuzzy Inference Inference System Techniques in ISO Standard System Techniques in ISO Standard,” Procedia Comput. Sci., vol. 270, pp. 6045–6054, 2025, doi: https://doi.org/10.1016/j.procs.2025.10.074.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 M Aidil Irawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
